Chapter I General Provisions In order to regulate coal mine safety facilities construction project design review and final acceptance of the work, to ensure mine safety, according to "Coal Mine Safety Supervision Regulations" and relevant laws and regulations, development of this approach. Article 2 The coal mine safety supervision institution shall apply these methods to the design review and completion acceptance of the safety facilities of the new construction, renovation and expansion of the coal mine and the state-owned key technological transformation project (hereinafter referred to as the coal mine construction project). Article 3 In the preparation of the feasibility study report or mining plan of a coal mine construction project, its safety conditions must be demonstrated. In the preliminary design stage of coal mine construction projects, safety specials must be prepared in accordance with regulations. Security specials include the demonstration of safety conditions, the design of safety facilities, and so on. The safety facilities design of coal mine construction projects must comply with the mandatory standards for engineering construction, coal mine safety regulations and industry technical specifications. Article 4 The safety facilities of coal mine construction projects must be designed, constructed, and put into production and use at the same time as the main project. Article 5 The design review and completion acceptance of the safety facilities of coal mine construction projects shall be carried out by the coal mine safety supervision organization according to the design and production capacity of the coal mines. If the designed production capacity is above 1.2 million tons/year (1.2 million tons/year), the national coal mine safety supervision agency is responsible. If the designed production capacity is below 300,000 tons/year and 1.2 million tons, the provincial coal mine safety supervision agency is responsible. If the designed production capacity is below 300,000 tons/year (including 300,000 tons/year), it shall be responsible for the coal mine safety supervision office of the coal mine. The provinces, autonomous regions, and municipalities directly under the Central Government that have not established coal mine safety supervision institutions shall design and review the safety facilities of coal mine construction projects with a designed production capacity of 1.2 million tons/year or less in their administrative areas, and shall be responsible for the designated departments of the people's governments of provinces, autonomous regions, and municipalities directly under the Central Government. .

Chapter II Design Review Article 6 The design of safety facilities for coal mine construction projects must be reviewed and approved by the coal mine safety supervision organization; construction may not be carried out without approval. Article 7 The design of safety facilities for coal mine construction projects must be undertaken by design units with corresponding qualifications. Article 8 The design of safety facilities for coal mine construction projects shall propose practical and feasible measures for major disasters such as coal mine water, fire, gas, coal dust and roof. The facilities, equipment and equipment identified in the design of safety facilities must comply with national safety standards and industry safety standards, and the investment budget estimates should be included in the total investment budget of the project. Article 9 Prior to the preliminary design approval of a coal mine construction project, the coal mining enterprise shall submit a written application and design information for the design review of the safety facilities of the coal mine construction project to the coal mine safety supervision organization in accordance with the provisions of Article 5 of these Measures. Article 10 After receiving the application for review, the coal mine safety supervision organization shall review the design of the safety facilities of the coal mine construction project.

The main criteria for the design and examination of safety facilities for coal mine construction projects are: (1) the design must be submitted by a qualified design unit; (2) The demonstration of coal mine safety conditions is sufficient, and the main disasters such as coal mine water, fire, gas, coal dust and roof The control measures are feasible; (3) comply with the mandatory standards for engineering construction, coal mine safety regulations and industry technical specifications; (4) the facilities, equipment and equipment determined meet the national safety standards and industry safety standards; The provisions of laws and administrative regulations. Article 11 The coal mine safety supervision institution shall review the design of the safety facilities of the coal mine construction project and shall complete the examination within 30 days from the receipt of the examination application and design information. If it is approved by the examination, it shall be approved by the document; if it is not agreed by the examination, it shall submit a review opinion and reply in writing. Article 12 When major changes are made to the design of approved safety facilities for coal mine construction projects, they shall be examined and approved by the original review agency.

Chapter III Completion Acceptance Article 13 After the completion of the coal mine construction project or before putting into production, the safety safety facilities and conditions shall be checked and accepted by the coal mine safety supervision organization; those that fail to pass the experience or fail to pass the inspection shall not be put into production. Article 14 Where the coal mine construction project meets the conditions for acceptance, the coal mine shall submit a written application for the completion and acceptance of the safety facilities and conditions for the coal mine construction project to the coal mine safety supervision organization in accordance with the provisions of Article 5 of these Measures. Article 15 After receiving the acceptance application, the coal mine safety supervision organization shall organize an inspection and acceptance team to check and accept the safety facilities and conditions of the coal mine construction project. Article 16 The main standards for the completion of safety facilities and conditions for coal mine construction projects are: (1) Safety facilities and conditions meet the design requirements and pass the project quality certification; (2) The main production systems and equipment are in normal operation and have safe production conditions. (3) Safety facilities such as mine ventilation, fire prevention, waterproofing, gas prevention, anti-virus, dust prevention, etc. can be put into normal use; (4) The mine manager holds the qualification certificate, and the special operation personnel hold the operation qualification certificate; Other relevant regulations. Article 17 The coal mine safety supervision institution shall accept and accept the safety facilities and conditions of the coal mine construction project. Acceptance within 30 days from the date of acceptance of the application, signing of qualified or unqualified opinions, and a written reply. If it is qualified by the provincial coal mine safety supervision agency and the coal mine safety supervision office, it shall be reported to the first-level coal mine safety supervision agency for the record.

Chapter IV Penalty Article 18 The design of safety facilities for coal mine construction projects shall be ordered by the coal mine safety supervision organization to stop construction without the approval of the coal mine safety supervision organization. If the construction is refused, the coal mine safety supervision organization shall transfer the geological minerals. The competent department revokes the mining license according to law. Article 19 If the safety facilities and conditions of coal mine construction projects are not accepted or the inspections are unqualified and are put into production without authorization, the coal mine safety supervision agency shall order it to stop production, and impose a fine of not less than 50,000 yuan but not more than 100,000 yuan; The competent department of geology and mineral resources transferred by the coal mine safety supervision agency shall revoke the mining license according to law. Article 20 Coal mine safety inspectors shall, in the design review and completion acceptance of coal mine construction projects, violate the relevant provisions of these Measures and impose penalties in accordance with the provisions of relevant laws and regulations.

Chapter V Supplementary Provisions Article 21 These Measures shall come into force on March 1, 2001.

External Fuel Pump

Diesel Pump,Fuel Pump Cost,External Fuel Pump,Aeromotive Fuel Pump

NCP AUTO PARTS CO.,LTD , https://www.nachuanfuelpump.com