Nowadays, the domestic light truck market is switching all five products. At this time, Futian Ouma and Futian Cummins have jointly thrown an “European-class 6†blockbuster at the Beijing Auto Show. On April 25, 2018, the 15th Beijing International Cars Launched, featuring the Jingdong Custom Super Card in the Foton Cummins ISF 4.5 Euro VI, and the Foton Euromar S5 unveiled at the Foton Motor Show. focus.
Foton Motor Show Stand
Equipped with a Jingdong Custom Super Card in the Foton Cummins ISF4.5 Euro VI Power
Reviewing the situation of the ISF Euro VI version of the Ouma S5
In recent years, due to the limited market capacity, the industry's attention to China Card products is not high. As a result, the product replacement is slow, and the satisfaction of market segments is not enough, especially logistics represented by Express Express. The company's demand for vehicle transportation efficiency. From the perspective of existing products in the market, the industry mainly uses large-displacement models with six-cylinder engines and quasi-medium-sized products with a capacity of about 160 horsepower, resulting in the appearance of “big horse-drawn cars†or “little horse-drawn cartsâ€. In the case of the former, the power is enough but it will lead to an increase in cost, while the latter lack of power will affect the operating efficiency, and it will also increase fuel consumption.
It is precisely to see the market opportunities, in the current Beijing auto show scene, Fudee Commercial Vehicle Group, senior vice president, Omar business division President Gu Dehua and Foton Cummins Engine Co., Ltd. general manager Guan Zhanghua jointly issued the Omar S5 Super middle card , And equipped with comparable to the small six-cylinder engine Futian Cummins ISF4.5 Europe 6 new power, precision cut into this potential market.
The excellent combination of Omar S5 and Foton Cummins
It is understood that this product is built on the basis of the Omega S5 Super Truck. Its environmental protection lead and intelligent technology have accurately explained the concept of the Futian Super Truck 2.0. It is equipped with Cummins's mature and classic ISF4.5L engine applied in the European market, not only has strong power, super durability, super saving and other advantages, but also meets Euro 6 emission standards with the SCR+DPF technology path.
Perhaps many domestic users are still unfamiliar with the Foton Cummins ISF 4.5 engine, but in fact it is a product with a mature market application similar to the original ISF2.8 and 3.8 power of Foton Cummins. According to Gu Dehua, vice president of Foton Commercial Vehicle Group and president of Omar Division, “ISF 4.5 is a global model and is a new generation of Cummins B series classic light models. It uses Cummins global production. Standards have been successfully applied in many markets around the world."
The China Truck Network reporter learned from the scene that the Foton Cummins ISF 4.5 Euro VI product has been sold in the overseas market for 4 years with a total quantity of more than 100,000 units, among which, Pekka, the largest medium and light truck manufacturer in Europe, is equipped with nearly 20,000 units. It has become the most trusted brand of light trucks in Europe.
Omar S5 card equipped with Foton Cummins ISF 4.5 engine
The Ouma S5 mid-size car that was unveiled at this show was equipped with a Foton Cummins ISF 4.5 engine, with a maximum power of 154kW (210 hp), a power increase of over 34kW/L, a maximum torque of 760N.m, and an economic speed range of 1200. -1800 r/min, economic vehicle speed coverage 55-95km/h, these data are much higher than the domestic 4-cylinder machine, and not inferior to the small 6-cylinder machine product. Compared with the small six-cylinder machine, the Foton Cummins ISF 4.5 is lighter, can significantly improve the vehicle's effective load quality, power and torque are close, and has a stronger competitiveness in terms of power.
Excellent gene ISF4.5L Euro 6 performance worth the wait
At the Beijing auto show site, the China Truck Network reporter learned that Cummins diesel engine production and sales above 2.5L ranks first in the world and exceeds 20% in the second place. At the same time, Cummins has a hundred-year history in the diesel engine field. It has cooperated with different models of different customers around the world and has accumulated rich experience. It can be said that Cummins series products have excellent genes.
Compared to the traditional small six-cylinder engine, Foton Cummins ISF 4.5L Euro VI power compact, modular and lightweight design, dead weight only 330kg, 30% lighter than similar four-cylinder machine, parts number reduced by 40%, More convenient for later maintenance and repair. While reducing its own weight, the ISF 4.5L engine also inherited the excellent genes of the original ISF 3.8 in terms of reliability and durability. Before the ISF 3.8 product has been made 1.2 million kilometers without major repairs, which is rare in the light diesel engine market. The ISF 4.5L Euro VI product has completed 2 million kilometers of road reliability test under different operating conditions. The market performance after the application of the product is naturally worth looking forward to.
Foton Cummins DPF device
According to the on-site introduction of the relevant person in charge of Omar, the adoption of Foton Cummins ISF4.5L Euro 6 Power's Omar S5 in the card, also has significant improvements in acceleration and climbing performance, compared to the small 6-cylinder machine products, in the same power transmission Under the condition of system combination, the vehicle's maximum speed, climbing speed, acceleration and other performance are better, and the fuel economy performance is also excellent.
As we all know, fuel consumption has always been the largest proportion of vehicle operating costs in the logistics industry. A seemingly small reduction in fuel consumption will have a substantial impact on user profits. Nowadays, the launch of the Smarco S5 with the Foton Cummins ISF 4.5L Euro VI will also build up a good reputation for fuel consumption and quickly open the market.
It is reported that the Futian Cummins ISF 4.5L Euro VI power will also enter the international market in addition to facing the domestic high-end market. At the same time, in order to meet the more stringent requirements of the international market, this product has also undergone a number of technical upgrades including reliability, durability, safety, dynamics, and economic indicators. Compared with other domestic products, the launch of ISF 4.5L Euro VI will gradually change the traditional concept of the Chinese card users to the engine, and it will also provide better power for Jingdong and other cold chain, fresh and other high-speed express market terminals. select.
Readings:Mini hydraulic Excavator is with compact design, and with low oil consumption, it is suitable to be used for small works,small projects, in garden, farmland, municipal works,vegetable greenhouse, digging trench It is with small engine, simple design, easy to maintain.
Advantages:
1.Power system: advanced turbocharged engine exhaust enough power reserves, it is possible to maximize the power of the engine to achieve the perfect match, reducing power losses.
2.Hydraulic system: imported international brands hydraulic parts, power loss, fast action, complex motor coordination, high efficiency and energy saving, reliability and long service life.
3.Walking System: use heavier type front and rear drive axle, gearbox, providing higher carrying capacity.
4.Cab: new style cab, new interior design, vision, bright and spacious, humane front gear mechanism, adjustable suspension seat with a high-grade, silicone shock absorption, superior driving environment.
5.Cooling system: parallel cooling installation, installation and removal are easy to clean; it has very high cooling efficiency.
Main scope: Concrete Grinding machines, Floor Polishing Machines, Road Line Marking Machines, Truck Cranes, Road Rollers, Excavators, Concrete Leveling Machines, Power Trowels and other Construction machinery .
Jining oking tec co.,ltd, established in 2010, is a professional manufacturer engaged in the research, development, production, sale and service of Concrete Grinding machines, Floor Polishing Machines, Road Line Marking Machines, Truck Cranes, Road Rollers, Excavators, Concrete Leveling Machines, Power Trowels and other Construction machinery .
We are located in Jining city,Shandong province with convenient transportation access. Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction.
In recent years, we have introduced a number of advanced production equipment, and also have an excellent production team and a complete quality assurance system to ensure that each batch of goods is delivered to customers in a timely and high quality.
We also have an excellent management team, experienced technical staffs and professional sales team to solve all problems you encountered before and after sales. In addition, we have obtained I S O 9 0 0 1:2 0 1 5 certificates. Selling well in all cities and provinces around China, our products are also exported to clients in such countries and regions as United States, Europe,Australia, Southeast Asia,Russia,the Middle East,Africa. We also welcome OEM and ODM orders. Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements.
Excavators,Crawler Excavators,Mini Excavator,Wheel Excavators,Mini Digger,Wheeled Excavator,Mini Used Excavators,Mini Excavator Price,Hydraulic Mini Excavator
Shandong Nicosail Group Co., Ltd. , https://www.diggerexcavator.com