X-ray Shoes, Toys, and Handbag Inspection Metal Detector for Factory Quality Control SA5030A

Designed for efficient inspection of hand baggage and parcels, this system features a single-energy L photoelectric diode array detector and runs on a Windows 7 industrial computer.

SA5030A X-ray security inspection system is widely used in critical infrastructure, government buildings, public transportation, international events, aviation, venues, and hotels.

SA5030A X-ray inspection system supports both pseudo-color and black & white image display, offering a simple and efficient operation with a user-friendly design.

 

Technical Specifications:
 
Tunnel Size 504*320mm (w*h)
Conveyor Speed 0.20m/s
Conveyor Height 693mm
Max Load 100kg
Wire Resolution 38AWG
Spatial Resolution Vertical: 1.0mm, Horizontal: 1.0mm
Penetration 10mm Steel Panel
Monitor 17-inch, 1280x1024 resolution
X-ray Generator Anode Voltage 80kV
Cooling / Operation Cycle Oil Cooling / 100% Duty Cycle
X-ray Dose per Inspection <0.16 μSv
Image Processing Pseudo Color/Black & White, Negative Image, High Penetration, Super Enhancement, Histogram Equalization, Back/Forward Check, Automatic Save
Zoom Variable Zoom up to X32, Continuous Magnification Supported
Image Checking Continuous Back Image Review
Storage Capacity Over 100,000 Images
Radiation Leakage <0.4 μSv/h (5cm from frame), Fully Compliant with International Radiation Safety Standards
Film Safety Complies with ASA/ISO1600 Film Standard
System Functions Programmable Keys, High Density Alarm, TIP, Date/Time Display, Baggage Count, User Management, System Work Timing, Radiation Timing, Self-Inspection at Power On, Image Save/Search, Automatic Maintenance/Diagnosis, Image Recognition Training
Optional Features Video Surveillance, LED Prompt Screen, Bi-directional Scan, Voltage Stabilizer, UPS Backup
Frame Size 1199*728*1197mm (L*W*H)
Weight 280kg
Environmental Temperature/Humidity -3°C ~ +40°C ±2°C / 5%~95% (Non-condensing)
Storage Temperature/Humidity -43°C ~ +60°C ±2°C / 5%~95% (Non-condensing)
Power Supply 220VAC (+/-10%) 50Hz +/-3Hz
Power Consumption 0.6kVA
Noise Level <55dB
 

Main Features:

1. Nine Sudoku keyboard for fast navigation through scanning images
2. USB output keyboard for easy image download
3. Special wireless keyboard and mouse for engineers
4. Unique feature: No image cut or incomplete even when the bag is placed against one side of the tunnel
5. Auto display in DEMO mode
6. High density object detection with automatic belt stop
7. Unlimited image recall capability
8. Automatic system diagnosis and checking


X-ray Shoes, Toys, Handbag Inspection Metal Detector for Factory Quality Control SA5030AX-ray Shoes, Toys, Handbag Inspection Metal Detector for Factory Quality Control SA5030A
X-ray Shoes, Toys, Handbag Inspection Metal Detector for Factory Quality Control SA5030A


X-ray Shoes, Toys, Handbag Inspection Metal Detector for Factory Quality Control SA5030A


X-ray Shoes, Toys, Handbag Inspection Metal Detector for Factory Quality Control SA5030A

X-ray Shoes, Toys, Handbag Inspection Metal Detector for Factory Quality Control SA5030A

Steel Rebars

Short for [reinforcing bar," rebar is refers to metal – usually steel – that`s used to help increase the tensile strength of concrete for a variety of needs, including many of the most common construction types you see every day.

Concrete is known to be weak in the areas we just mentioned, at least compared to steel and other metal types. If this reinforcement was not used, these structures would at-risk of falling apart.

Rebar usually will be built so the metal component is not visible within the structure. Rather, it will be buried within the concrete. It`s usually made with ribs rather than smoothly, allowing it to avoid slippage within its structure.

How Rebar is Made

As we noted above, the most common material for rebar use is steel, which is used because of its excellent tensile properties. It`s often made from forms of recycled steel, which will be melted down using an electric arc furnace, cooled using billets, and then stored until it`s needed.

From here, billets can be reheated to an elevated temperature and fed through extrusion tools, then necked down until its proper size is reached. Finally, it will be tooled to create the proper ribbing, which we noted above is in place to prevent slippage within concrete. Then it will be sheared to the proper length, and it`s ready to go.

Carbon Steel Deformed Steel Rebars,Reinforcing Steel Rebar For Construction,Hot Rolled Steel Rebar,Deformed Steel Rebar

SHANDONG HUITONG STEEL CO.,LTD , https://www.cnmetalsupply.com