Model NO.: GD-2134D
Customized: Non-Customized
Color: Blue
Output Frequency: 500Hz, 1kHz, 8kHz, 33kHz, 66kHz, and 93kHz
Output Power: Max. 10W
Output Voltage: Max. 200V (AC Peak Value)
Display: 128*64 LCD Display
Built-in Lithium Battery: Nominal 14.8V, 7Ah
External Power Supply: Rated Voltage DC12V (Car Cigarette Lighter Output)
Charger: AC 100-240V Input, 50/60Hz, Output DC 16.8V, 2A/3A
Trademark: HV Hipot
Transport Package: Wooden Case
Specification: ISO, SGS
Origin: China
HS Code: 9030332000
Cable Identifier and Tracing Tester
The GD-2134D Cable Identifier is a professional tool designed for locating, tracing, and identifying underground cables and metallic pipes. It also helps in distinguishing individual cables from a group of cables, making it an essential device for electrical maintenance and installation professionals.


Key Features
 
Transmitter
 
Supports three output modes: direct connection, clamp coupling, and radiation induction. Offers six frequency options: 500Hz, 1kHz, 8kHz, 33kHz, 66kHz, and 93kHz. The 500Hz and 1kHz frequencies are complex and support correct/false indication and pipe identification when used with the receiver. Includes a fault signal output for detecting grounding faults. Provides a maximum power output of 10W, adjustable in four steps. Features automatic impedance matching, overload, and short-circuit protection. Powered by an internal lithium battery that can be charged via AC adapter or car cigarette lighter. Automatically shuts down when low on power to protect the battery. Designed for durability and portability.
 
Receiver
 
Equipped with left/right arrow indicators for cable route tracing (patented technology). Offers correct/false indication (patented) to determine if the cable is being traced correctly. Strong anti-interference capabilities ensure accurate readings. Automatically measures depth and current. Supports multiple detection modes for increased accuracy. Compatible with various frequencies: 500Hz, 1kHz, 8kHz, 33kHz, 66kHz, and 93kHz. Includes two passive detection bands: power frequency and radio frequency (RF), eliminating the need for an audio frequency generator. Displays history curves for signal strength. Supports cable identification through clamp or stethoscope methods. Clamp identification provides precise current amplitude and direction, while stethoscope identification is ideal for situations where clamps are not convenient. Capable of detecting grounding faults. Built-in lithium battery for portability. Automatically turns off after 30 minutes of inactivity. Robust and easy to carry.
 
 
Technical Specifications
 
Transmitter
 
Output Frequency 500Hz, 1kHz, 8kHz, 33kHz, 66kHz, and 93kHz. 500Hz and 1kHz are complex frequencies. 8Hz is a very low complex frequency used for fault location.
Output Power Maximum 10W for 500Hz, 1kHz, 8kHz, 33kHz, and fault location. Four adjustable power levels: 2.5W, 5W, 7.5W, and 10W. 1W for 66kHz and 93kHz.
Output Voltage Maximum 200V (AC peak value), automatically adjusted based on load.
Display 128*64 LCD display.
Built-in Lithium Battery Nominal 14.8V, 7Ah.
External Power Supply Rated voltage DC12V (car cigarette lighter output).
Charger AC 100-240V input, 50/60Hz, output DC 16.8V, 2A/3A.
Size 275 x 220 x 100 mm.
Weight 2.4 kg.
Operating Conditions Temperature: -10°C to 40°C; Humidity: 5%-90% RH; Altitude: below 4500m.

 
Receiver

Input modes include built-in receiving coil, clamp, 1k stethoscope, 8k stethoscope, and A-type fault detection device. Receiving frequencies include active detection (500Hz, 1kHz, 8kHz, 33kHz, 66kHz, 93kHz) and passive detection (power frequency and RF). Supports clamp identification at 500Hz and 1kHz, clamp current measurement at 500Hz, 1kHz, and 8kHz, and stethoscope identification at 1kHz and 8kHz. Detects grounding faults at 8Hz. Detection modes include automatic peak method (wide), peak method, narrow method, and null method. Cable identification includes automatic clamp identification, clamp current measurement, and stethoscope identification. Features a 320x240 LCD display showing signal amplitude, direction, correctness, history curve, depth, current, and results. Built-in lithium battery rated at 7.4V, 7Ah. Charger: AC 100-240V input, 50/60Hz, output DC 8.4V, 2A/3A. Size: 700x270x120mm. Weight: 3.5kg. Operating conditions: Temperature 0°C to 40°C, Humidity 5%-90% RH, altitude below 4500m.

Modular Air Filter

Compressed Modular Air Filter,compressed air filter,compressed precision air filter

Hongrijia Depurate Facility Science & Technology Co.,Ltd. , https://www.yukafilter.com