Including the machine body or its own various types of electrical distribution lines or distribution cabinets, the electrical switch from the machine switch to all electrical components and agencies should meet the requirements. The electrical cabinet doors should be closed tightly. There is no debris and no workpieces in the front of the door within 08m. The cabinet doors are easy to open; the electrical layout inside the cabinet is reasonable, the wiring is neat, and the numbers are clear and correct; the cabinet is clean and dry, and there is no dust accumulation. Water, oil accumulation, no sundries or electrical spare parts; protection devices such as anti-short circuit, overload, voltage loss, undervoltage, self-locking, interlock, over-current, and signal are all intact and effective; all fuse elements are matched with the load and must not be used arbitrarily Failed fuses are replaced; all electrical switches, handles are located reliably, each indicator, indicating instrument, operation button, etc. are marked clearly, and are in good condition and complete; each line has no aging, damage, and the serpentine pipe is not damaged or detached by pressure. Metal cabinets should be protected with a protective grounding and reliable connection. If there are electrical components on the cabinet door, the door should be connected to the enclosure with plastic copper conductors.
Jiangxi Zhilian New Materials Co., Ltd , https://www.zhilian163.com