With the improvement of living standards, the awareness of safe consumption will gradually increase, people’s requirements for the safety and quality of vegetable products will also become higher and higher, and the green prevention and control technologies of pests are also very popular in recent years. The National Agricultural Technology Center is also In the gradual promotion of such prevention and control measures, focusing on key crops, major pests and diseases, the organic combination of the implementation of biological control, ecological control and other safety measures. The combined use of these measures can reduce the use of pesticides, improve the control of pests and diseases, increase the quality of vegetables, protect the ecological environment, and promote sustainable development.

Based on the success of the experiment, Tonghai County Economic Development Station carried out demonstration and promotion of green prevention and control technologies in Dashu Village, Tonghai County, and achieved good results. Field investigation and test records show that the green prevention and control technology demonstration area adopts integrated control measures such as agricultural control, insecticidal lamps, insect nets, sex attractants, yellow boards, and biological and bionic pesticides to control pests, and their field pests The population was significantly reduced, and the use of chemical pesticides was significantly reduced. The number of chemical pesticides per vegetable was reduced by 2 to 3 times from the conventional production area, and the average cost of 667 m2 was reduced by 70.07 yuan. At the same time, the pesticide residues in vegetables are reduced, the quality of vegetables is improved, the pollution to the agricultural ecological environment and the human living environment is reduced, natural natural enemies are protected, and they have good economic, social and ecological benefits.

Tonghai County implemented a grass-roots agro-technical popularization project to utilize sexual attractants that mimic nature's insect sex pheromone and release it into the field through a release device to trap and kill the bionic high-tech products of heterosexual pests. The technology of sexual inducement prevention is to induce male moths to traps and kill male moths through the release of synthetic sex pheromone by lure cores, which is a new type of prevention and control technology for the purpose of pest control. The technology does not touch the plants and agricultural products in the process of trapping and killing insect pests, and there is no worry about pesticide residues. It is one of the preferred methods for modern agricultural ecological control pests. It plays a very important role in promoting the development of modern scientific agriculture.

 Punching Machine

Punching production is mainly used for metal sheet . Through the mold, can be blanking, punching, forming, drawing, dressing, fine punching, shaping, riveting and extrusion parts, and so on, widely used in various fields.


Product Description
1.Steel welded body, tempering treatment, high rigidity, accuracy and stability;
2.The crankshaft undergoes grinding treatment after high frequency quenching;
3.Pneumatic dual balance cylinder, which balances the slide block and punch weight to reduce noise and impact;
4. Combined pneumatic clutch and brake are made of friction material, which means long service life;
5. PLC electric control system is safe and reliable;
6. Machine is with both hands button and foot switch to achieve continuous, single and inching practices.



Main Features: 
1.  The punching machine is suitable for forming, blanking, punching, bending and other cold stamping process.
2.  The Casting fuselage,maximum rigidity and minimum deflection for accurate parts and long tool life. body can be tilted, high rigidity and less deformation Compact. Thick plates and large columns provide you with the stable platform .
3.  The Machine use Rigid rotated bond clutch rigid and well supported. The clutch gives continuous strokes for mass production.
4.  Crank shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for smooth working, longer life & accuracy.
5.  Properly sized flywheel, is made of high grade cast iron, for storing and releasing adequate energy for the pressing operations, and properly balanced for smooth running.
6.  Gear are of steel cast or fabricated. Gear teeth are generated by precision hobbing machine.
7.  Machine is with both hands button and foot switch control: anti-tie down, non-repeat controls with ring guards.

8.  Protective fence and the safety interlock to ensure the operation safety. Have a movable single-hand pedal switch,easy to operate.


Our factory is the professional and leading manufacturer.

we can produce, design, installation and debug various roll forming machines and metal cold processing equipments.

Main products include metal roof  panel, glazed roof tile, CZ steel  purlin, floor decking, roof ridge cap, sandwich panel, metal keel, roller shutter panel, door frame, metal fence, and  sheet uncoiler, bending, slitting, cutting, flattening, punching, crimping.

Backed by reasonable design, precision machining and selected material, both our standard and customized machines are characterized by long life span, precise forming and easy operation. With our customers` trust, our machines have been sent to America, Australia, Russia, India, Sri Lanka, Nigeria, Pakistan, Uzbekistan, Mozambique, Angola, Turkey, Brazil, etc.

Warmly welcome to visit our factory.

Punching Machine

Punching Machine,Punching Press Machine,Automatic Punching Machine,High Performance Punching Machine

CANGZHOU DIXIN ROLL FORMING MACHINE CO., LTD , http://www.hebeimachine.com