In general, the rural social security policy is that the government must attach great importance to and solve the problem. Although there are many constraints, the government's investment in the rural social security system is very necessary.
The government actively promoted the favorable conditions of the rural social security system. Today's rural social pension insurance today! Tomorrow China Rural Research Network.
2 Tao Yong. Perspective of Chinese Peasant Social Security System under the Structure of Meta-Economy 3 Song Xiaotong. The reform of China's social security system is rampant. Beijing Tsinghua University has 4 Lu Xiangxiang. The new institutional economics is 1 cubit. Beijing China Development Press. 2001.
5 Chen Yinxi. The welfare system of modern society is suppressed. Beijing Economic Science Publishing Liability Li Xuanzhi Goldman Sachs warned that China's economy may accelerate its slowdown. China Economic Times reported that Dominic, a senior economist at Goldman Sachs. Wilson believes that China's economic development may slow down faster than expected. When he was asked about the continued popularity of China in the international community in recent years, this question is related to whether the Internet economy bubble, which was highly anticipated and heatedly discussed four years ago, is replied, replied, yes, among them There is a certain comparability.
He said that some people imagine that China's economy will continue to grow at a high speed for a long time, which is unrealistic. Our forecast is that the Chinese economy will not grow at a rate of 89 forever, which may be pessimistic for some people. We made a more pessimistic prediction that China's economic development will drop to around 3.5 in the mid-1940s. Even so, the high labor rate of the labor force and the stable convergence of the economy mean that China will become the world's largest economy in 2041.
Die Casting Parts:
The casting is a metal human control of hot working process relatively early, has a history of about 6000 years.In early 1700 BC to 1000 China has entered into casting heyday era,the technology has reached a very high level.
the material to be casting is usually solid but heated to a liquid metal (copper, iron, aluminum, lead, tin, etc.), and mold materials can be sand, metal and even ceramics. In response to different requirements, the use of the method will be different.
Different Category:
Casting blank is almost forming, which achieves the goal of free machining or less processing, reduces cost and reduces production time to a certain extent. Casting is one of the basic processes in modern equipment manufacturing industry.
(1) Sand casting:
Using sand as the mold material, also known as sand casting, foundry, including wet sand, dry sand and chemical hardening sand 3, but not all are available in sand casting. Advantage is low cost, because of the use of the mold sand can be reused; drawback is the mold manufacture time-consuming, repeated use casting model is not possible. To damage can be achieved after the finished product.
(2) Special Casting Process:
According to the special casting molding materials can be divided into natural mineral sand as the main materials (such as casting, mud casting, shell casting, vacuum casting, mold casting, ceramic mold casting, special casting and metal) as the main cast materials (such as metal casting, pressure die casting, continuous casting, low pressure casting, centrifugal casting, etc.
2.1 Metal mold casting method: using high melting point is the raw material made of metal mold. The subdivision for gravity casting, low pressure casting and pressure casting method. By casting the melting point can be cast metal has also been limited.
2.2 Lost wax casting method: this method can for membrane casting and solid casting. First the object copy the required casting wax, and then dipped into ceramic containing (or silica sol) in the pool and stay dry, the wax replica covered with a layer of ceramic membrane, repeating the steps until the outer membrane is sufficient to support the casting process (about 1/4 inch 1/8 inch), wax melting in the mold, and out of the mould. Then many times to enhance the mold temperature, the hardness can be used to rear casting.
Based on different casting raw material,we`ve Steel Die Casting,copper alloy die casting and aluminium alloy die casting.
Processing:
(1)The mold preparation (liquid metal become a solid container for casting ) according to the material used can be divided into sand, metal, ceramic, clay, graphite, according to the frequency of use can be divided into single type, semi permanent and permanent mold preparation, quality is the main factor affecting the quality of castings;
(2) The melting and casting;:casting metal (alloy) mainly include all kinds of cast iron, cast steel and casting of nonferrous metal and alloy castings;
(3) The processing and inspection: casting processing including removal of the core and the casting surface removal of foreign body, riser, shovel thorn and sanding fash protrusions and heat treatment, plastic. Anti rust and rough machining.
Die Casting Parts,Steel Die Casting,Copper Die Casting,Aluminium Die Casting
VESTA Motoring Ltd , http://www.vesta-industry.com