Our history
In the year 2006, DUHUI is a small factory manufacture wheel bearing and hub, only 15 workers.
In 2008 year, DUHUI attend the exhibition in Europe and South America etc to expand the business, then receive the positive feedbacks from our clients.
In 2010 year, DUHUI develop the other auto bearings, such as tensioner, release bearing, with more than 100 workers.
In 2014 year, DUHUI move to the new factory to fulfill the increasing capacity need from our clients.
In 2016 year, DUHUI establish professional sales and after sales team with more than 10 persons to the bettter service to our clients.
Our Products
Wheel bearing
Wheel bearing kits
Wheel hub
Tensioner
Timing belt kits
OAP
Hydraulic release bearing
…
Our Business Range
USA, CANADA,MEXICO, BRAZIL, ARGENTINA,PERU, CHILE,GERMANY, POLAND, FRANCE,UK,SWEDEN, RUSSIA, LITHUANIA, SPAIN, AUSTRALIA, THAILAND, LIBYA, JORDAN ,EGYPT And more than 100 countries.
We are looking forward to doing more business with your company, develop our business relationship, and also the friendship.
Our Mission & Vision
With the customer in focus and in selected markets to develop, produce and distribute quality spare parts for the automotive after-market.
We wish to be known for our customer DUHUI provide the qualified auto parts in efficient way, and make everyone use our parts to drive safely. Â
Â
Our history
In the year 2006, DUHUI is a small factory manufacture wheel bearing and hub, only 15 workers.
In 2008 year, DUHUI attend the exhibition in Europe and South America etc to expand the business, then receive the positive feedbacks from our clients.
In 2010 year, DUHUI develop the other auto bearings, such as tensioner, release bearing, with more than 100 workers.
In 2014 year, DUHUI move to the new factory to fulfill the increasing capacity need from our clients.
In 2016 year, DUHUI establish professional sales and after sales team with more than 10 persons to the bettter service to our clients.
Our Products
Wheel bearing
Wheel bearing kits
Wheel hub
Tensioner
Timing belt kits
OAP
Hydraulic release bearing
…
Our Business Range
USA, CANADA,MEXICO, BRAZIL, ARGENTINA,PERU, CHILE,GERMANY, POLAND, FRANCE,UK,SWEDEN, RUSSIA, LITHUANIA, SPAIN, AUSTRALIA, THAILAND, LIBYA, JORDAN ,EGYPT And more than 100 countries.
We are looking forward to doing more business with your company, develop our business relationship, and also the friendship.
Our Mission & Vision
With the customer in focus and in selected markets to develop, produce and distribute quality spare parts for the automotive after-market.
We wish to be known for our customer DUHUI provide the qualified auto parts in efficient way, and make everyone use our parts to drive safely. Â
Â
Metal Body Square Water Cooling Tower
This series of products run stable, low noise, energy-saving, in office buildings, shopping malls, hotels, residential areas and other central air-conditioning supporting the use of better results.
The company's standard cooling tower according to the international design conditions design, can also provide customers with non-standard operating conditions or specific sizes under the special, special design.
The circulating water pump suction port shall be located below the water level of the cooling tower catchment basin, and the cooling tower outlet pipe shall not be allowed to be higher than the maximum water level of the catchment basin.
Pipe mounts should be pipe racks and cooling towers should not be allowed to directly bear the weight of the pipes.
The rehydration pipe of the cooling tower should be provided with a support stand to avoid vibration of the pipe when the float valve is rehydrated.
Rehydration pressure should be below 5m water pressure, national standard
The flannage pressure is 1.0Mpa.
When two or more units are assembled, our company will provide a connecting balance tube to balance the chassis water level. The tower top inlet should be set with a conditioning valve in order to enter each
.The water level of the tower is uniform.
The noise is measured at dm1.13VL-W at the equivalent diameter of the cooling tower (Dm1.13VL*W), 1.5 meters above the ground height, wherein L and W are the shape rulers of the tower
inch long and wide).
The use of cellular continuous blister series of diversion,heat dissipation, water collection three-in-one native filler, the whole suspension, gravity cloth water, low drop of water, with cold effect
High, low energy consumption, less drift water, less noise and so on, floating water rate is less than 0.001%.
When connecting different types of towers, the bottom basin water level height of different types of towers must be taken into account, and the base height must be adjusted to maintain the water level balance of the towers.
Metal Body Square Water Cooling Tower,Tower Water Cooler,Water Cooled Cooling Tower,Tower Cooling System
Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.fangzhouarkfluid.com