Model No.: AT10080
Alarm Type: Display Alarm
Origin: Shenzhen, China
Brand Name: Safeway System
Trademark: Safeway System
Packaging: Wooden
Standards: CE, SGS, ISO
Country of Origin: China
HS Code: 9022191090
| Physical Specifications | |
| Unit Weight (kg) | 877 |
| Unit Dimensions (mm) | 3146(L) x 1295(W) x 1648(H) |
| Packed in Wooden Pallet - | |
| Gross Weight (kg) | 1050 |
| Packing Size | #1: 226 x 143 x 194 cm |
| #2: 113 x 91 x 142 cm | |
| General Specifications | |
| Tunnel Dimensions (mm) | 1005(L) x 807(W) |
| Conveyor Speed (m/s) | 0.22 |
| Conveyor Height (mm) | 296 |
| Max Conveyor Load (kg) | 200 |
| X-ray Dose per Inspection | Typical 1.5 μGy/h, Guarantee 2.0 μGy/h |
| X-ray Leakage | Typical 1.0 μGy/h, Guarantee 1.5 μGy/h |
| Penetration Capability | Typical 38 mm, Guarantee 34 mm |
| Wire Resolution | Typical AWG 38, Guarantee AWG 36 |
| Penetration Resolution | Typical AWG 32, Guarantee AWG 30 |
| Spatial Resolution | Typical 1.3 mm (dia), Guarantee 1.6 mm (dia) |
| Power Consumption | Max. 1 kW |
| Noise Level | < 60 dB |
| Film Safety | Guarantee ASA/ISO 1600 Film |
| X-ray Generator (Single) | |
| Anode Voltage | 160 kV |
| Anode Power | 0.8 mA |
| Angle of Radiation | 80 degrees downward |
| Direction of Radiation | Top to bottom |
| Cooling / Duty Cycle | Oil Cooling / 100% Duty Cycle |
| Manufacturer | Spellman or Local Made |
| Image System | |
| X-ray Sensor | L-Shaped Photodiode Array (Multi-Energetic), 16-bit Deep |
| Image Display | High-resolution 1024 x 1280 pixels; 65536 Grey Levels |
| Image Enhancement | 1-64 times enlargement, Color/BW, Negative, High/Low Penetration, Organic/Inorganic Stripping, General Enhancement, Pseudo Color, etc. |
| Image Recall | All previous images are recallable and retrievable |
| Explosives & Narcotics Detection | Alarms and highlights based on atomic number signature |
| High-Density Region Alarm | Alerts for impenetrable areas that may hide threats or contraband |
| Threat Image Projection | Inserts realistic threat images into baggage during screening to maintain vigilance, training, and assessment of image identification skills |
| Image Archive | Up to 200,000 images stored automatically, transferable to USB, and convertible to JPG, BMP, etc. |
| Additional Features | Time/date display, counters, user management, system-on/X-ray-on timers, power-on self-test, built-in diagnostics, dual-direction scanning, system log, standby mode, stimulant training, ADS, etc. |
| Network Applications | Multiple remote applications available via Ethernet LAN and Windows platform, such as centralized image storage, recheck workstations, network TIP, etc. (Optional) |
| Image Processing | 24-bit real-time processing, 4-color analysis, date and ID displayed on images, bag count tracking |
| Operating Environment | |
| Operating Temperature/Humidity | 0°C – 45°C / 5% – 95% (non-condensing) |
| Storage Temperature/Humidity | -40°C – 70°C / 5% – 95% (non-condensing) |
| Operating Power | 220 VAC (±10%) 50 ± 3 Hz (Optional: 100 VAC, 110 VAC, 120 VAC, 200 VAC) |
| UPS | 15 mins, 30 mins, 60 mins, etc., optional |
| Computer & Other Components | |
| Monitor | High-Resolution Color LCD, 17-inch |
| Hard Disk | Seagate 500GB 3.5" |
| CPU | G1610 2.6 GHz |
| RAM | 2GB 1600MHz DDR3 Innodisk |
| Mainboard | H61 SYM76993VGGA |
| Compliance | |
| International | * ISO 19001, ISO 14001, OHSMS 18001 * CE * USA FDA * Maximum X-ray leakage less than 5 μSv/h (0.5 mR/h) at 5 cm from any external surface (European standard: less than 1 μSv/h (0.1 mR/h) at 10 cm from any external surface) |
| National (China) | * Health Inspection Report * Computer Software Copyright Registration Certificate * Software Product Registration Certificate * Radiation Safety Certificate from Ministry of Public Security * Quality Certification from Safety and Police Electronic Products Quality Inspection Center * Design Patent Certifications: Patent No. 201020700245.2, 201020700245.8, 201020700256.0 |
Special Iron Sulfide For Resin Grinding Wheels
Application of Ferro Sulfur for the manufacturing of cast iron:
Low sulfur content in gray cast iron molten iron is harmful: poor inoculation effect, poor graphite morphology, and poor cutting performance
When melted in a foundry, the residual sulfur content decreases, mainly due to the use of scrap steel and low sulfur.
The content contained has been determined, and if the sulfur content is below 0.04%, melting will not easily react with the inoculant.
Therefore, it is necessary to use sulfur addition agent to increase the sulfur content, in order to maintain the sulfur content within the range of 0.05% to 0.12%.
Within this range, sulfur shortens the length of graphite, blunts its ends, bends its morphology, and improves its mechanical properties. When the sulfur content is below 0.05%, sulfur addition treatment must be carried out.
According to metallographic analysis, sulfur in molten iron exists in a special form, so it is necessary to use a specialized sulfur addition agent when adding sulfur. Do not use sulfur or other sulfur containing minerals as this can greatly damage the internal structure of the casting!
For ductile iron, a low sulfur content (below 0.008%) in the raw molten iron is also unfavorable. The normal range of 0.010% -0.014% is better. However, for electric furnace melting, it is necessary to use sulfur oxygen inoculants within this range to slightly increase sulfur and improve the activity of molten iron
The use method of sulfur addition agent: During the production process of the electric furnace, a small amount of iron is added to the furnace, and then sulfur addition agent with the particle size of 8-25mm is added to the furnace according to the sulfur demand. Then add iron to press the sulfur addition agent for melting, with an absorption rate exceeding 99%
Specification of sulfur addition agent: -150 mesh -325 mesh 10-30 mesh 10-50 mesh 5-15mm 200 mesh 325 mesh 400 mesh 95% pass
Golden Resin Grinding Wheel,Used in the Grinding Industry,Abrasive Iron Sulfide
LUANCHUAN COUNTY HENGKAI METALLURGICAL MATERIALS SALES CO.,LTD , https://www.pyritechina.com