White mud-like fillers are high-strength floc-form synthetic fiber high-purity dispersions, special sealants, lubricants, and mud-like substances that are synthesized and produced in strict accordance with strict processes. They are safe and non-polluting. They are upgrades for pump packing. Advantages of white muddy stuffing: First, easy installation, can achieve non-stop pump maintenance; Second, no specifications, easy storage, procurement; Third, do not wear sleeves to reduce maintenance, workload.
Description White pulpy <br> <br> a filler, blocking both ends of the fiber ends are placed in the mud fiber packing ring can be prevented by the pressure Release white pulpy packing and shaft revolution thrown. Place the fiber packing ring staggering the interface.
After adding the white mud-like filler, press on the finger and place the packing ring to press the cover.
Second, the pressure on the white cover immediately after the white muddy stuffing filled with mud, press the gland, loosen after tightening the screw, add mud to fill, install the fiber packing ring (to prevent mud extrusion). Tighten the cap again. Note: Do not tighten the cap tightly when tightening the screws twice. Allow water to dripping (discharging heat)
Third, the white mud-like filler allows drips To prevent the loss of the temperature of the filler, please control the appropriate dripping. Elastically control the gland to make it drip in two seconds, one drop to two drops in one second. If a large amount of running water indicates an installation failure, refer to the failure handling table.
The other factors affecting the effect of white mud-like fillers are as follows: 1. The gap between the two ends of the gland and the sleeve reaches 1 mm, and the service life is shortened by 3/4 compared with the gap of 0.5 mm.
2, the pump pressure, medium conditions may affect the use of results.
Application of white mud filler:
White mud seal packing is used for the sealing of valves and pumps in industrial chemicals, food, drinking water, pharmaceuticals, petroleum, metallurgy, chemical, fertilizer, power generation, papermaking, water treatment and other industrial fields.
White mud filler features:
1. White Mud Filler White Mud Seal Mud is made of PTFE-certified lubricant blended with white PTFE fibers. It is non-polluting, non-toxic and conforms to food grade. The white mud-like filler changes the packed packing model with packing as the main body. There is no specification limit, that is, all packing seals suitable for the factory.
2. It does not require harsh accuracy requirements for the stuffing box and the shaft, especially for the seal of the worn shaft.
White mud filler technical parameters:
Temperature:-40°C-+260°C; Pressure: 30MPa; Chemical resistance: PH value 0-14
Features: 1. The white mud filler does not require harsh precision requirements for the stuffing box and the shaft, especially for the seal of the worn shaft. 2, white mud filler is widely used in high temperature and other harsh industrial and mining pumps and valves. 3, white mud filler self-lubricating friction coefficient, can reduce the shaft power loss. Online repair can be achieved without stopping the machine and “zero leakage†can be achieved. The white mud-like filler meets the requirements for energy saving, consumption reduction and environmental protection. White mud filler technical parameters: temperature -40 degrees Celsius - +650 degrees Celsius: force 25 Pa; ph value 0-14. Slurry filler (injection filler, soft filler, filler mud, mud seal mud) white mud filler is High-intensity floc-form synthetic fiber high-purity dispersions, special sealants, lubricants, and mud-like substances produced in accordance with strict processes can be produced according to the user's required technical data. The white mud-like fillers are very smooth, and After water contact, it will not affect the color of water. White mud filler is the upgrading product of pump packing.
Description White pulpy <br> <br> a filler, blocking both ends of the fiber ends are placed in the mud fiber packing ring can be prevented by the pressure Release white pulpy packing and shaft revolution thrown. Place the fiber packing ring staggering the interface.
After adding the white mud-like filler, press on the finger and place the packing ring to press the cover.
Second, the pressure on the white cover immediately after the white muddy stuffing filled with mud, press the gland, loosen after tightening the screw, add mud to fill, install the fiber packing ring (to prevent mud extrusion). Tighten the cap again. Note: Do not tighten the cap tightly when tightening the screws twice. Allow water to dripping (discharging heat)
Third, the white mud-like filler allows drips To prevent the loss of the temperature of the filler, please control the appropriate dripping. Elastically control the gland to make it drip in two seconds, one drop to two drops in one second. If a large amount of running water indicates an installation failure, refer to the failure handling table.
The other factors affecting the effect of white mud-like fillers are as follows: 1. The gap between the two ends of the gland and the sleeve reaches 1 mm, and the service life is shortened by 3/4 compared with the gap of 0.5 mm.
2, the pump pressure, medium conditions may affect the use of results.
Application of white mud filler:
White mud seal packing is used for the sealing of valves and pumps in industrial chemicals, food, drinking water, pharmaceuticals, petroleum, metallurgy, chemical, fertilizer, power generation, papermaking, water treatment and other industrial fields.
White mud filler features:
1. White Mud Filler White Mud Seal Mud is made of PTFE-certified lubricant blended with white PTFE fibers. It is non-polluting, non-toxic and conforms to food grade. The white mud-like filler changes the packed packing model with packing as the main body. There is no specification limit, that is, all packing seals suitable for the factory.
2. It does not require harsh accuracy requirements for the stuffing box and the shaft, especially for the seal of the worn shaft.
White mud filler technical parameters:
Temperature:-40°C-+260°C; Pressure: 30MPa; Chemical resistance: PH value 0-14
Features: 1. The white mud filler does not require harsh precision requirements for the stuffing box and the shaft, especially for the seal of the worn shaft. 2, white mud filler is widely used in high temperature and other harsh industrial and mining pumps and valves. 3, white mud filler self-lubricating friction coefficient, can reduce the shaft power loss. Online repair can be achieved without stopping the machine and “zero leakage†can be achieved. The white mud-like filler meets the requirements for energy saving, consumption reduction and environmental protection. White mud filler technical parameters: temperature -40 degrees Celsius - +650 degrees Celsius: force 25 Pa; ph value 0-14. Slurry filler (injection filler, soft filler, filler mud, mud seal mud) white mud filler is High-intensity floc-form synthetic fiber high-purity dispersions, special sealants, lubricants, and mud-like substances produced in accordance with strict processes can be produced according to the user's required technical data. The white mud-like fillers are very smooth, and After water contact, it will not affect the color of water. White mud filler is the upgrading product of pump packing.
KOREAN Vehicle Clutch Kit
Korean Vehicle Clutch Kit range Hyundai, Kia, Daewoo. Most of them are applicable for passenger car and light commercial vehicle.
With over 20 years` experience of Clutch Cover, clutch disc and clutch kit assembly, you can rely on us to supply you with quality products, backed up by exceptional customer service.
OE No., SACHS No., LUK No., EXEDY No., AISIN No., VALEO No. are all available for us. It is our pleasure to be on service of you.
If you have any questions, please let me know and we will try our best to support the best price and great service.
I look forward to mutual development with you step by step.
Korean Vehicles Clutch Kit,Daewoo Clutch Kit,Hyundai Clutch Kit,Kia Clutch Kit
Yuhuan Shouyuan Machinery Co., Ltd. , http://www.sycclutch.com