Visbella Easy Use DIY Rear Window Defogger Repair Kit

Visbella^Â® Rear Window Mirror Defogger Repair Kit is designed to fix scratched or broken rear window defogger grid lines. The surface must be smooth and flat for optimal adhesion. Repairs are best performed at temperatures between 50Â°F and 75Â°F (10Â°C to 24Â°C). This cost-effective solution offers a high-quality repair for damaged defogger grids and tabs, making it ideal for DIY users.

Product Attribute

Kit Contains	Other Information
1* 2ml Silver Repair 1* Cotton Swab 1* Masking Tape 1* Alcohol Pre-Pad 1* Plastic Scraper 1* Clean Cloth	Chemical Type	Repair Resin
	Color	Silver
	Packing	48pcs/carton (12pcs*6box)
	Gross Weight	3.9kgs

Advantages & Features

Perfect for repairing scratched or broken rear window defogger grids
Provides permanent and nearly invisible repairs
Easy to use with low-cost solution
Special formulation allows electrical conductivity
Simple step-by-step instructions included
Ensures long-lasting results

How to Use

Production Line

Company Overview

Zhejiang Guoneng Technology Co., Ltd. was established in 1996 and has over 20 years of professional manufacturing experience. We are one of the largest manufacturers of adhesives in Huzhou City, Zhejiang, China. Our company covers an area of 22,000 square meters, including an 800 square meter laboratory and over 200 employees. We specialize in the production and distribution of adhesive products, which are approved by SGS, REACH, ROHS, BSCI, ISO9001:2000, and more. OEM and ODM services are available.

We aim to build long-term partnerships with customers around the world based on mutual benefits. Our core value is "Customer First," and we are committed to providing high-quality HPPP (Honest, Prompt, Precise, Professional) service to all reliable and esteemed international partners and clients.

Certifications

After-Sales Services

24-Hour Response: Professional consultation is available within 24 hours after receiving your feedback.
Global Insurance Service: Ensures the safety of the product during installation and application.
Compensation Policy: If quality issues arise due to our side and sufficient evidence is provided, we will offer free re-production.

Matt Vinyl Wrap

Matte vinyl wrap is a type of vinyl material that has a non-glossy, flat finish. It is commonly used to wrap vehicles, such as cars, motorcycles, and boats, to change their appearance and protect the original paintwork. Matte vinyl wrap gives a sleek, modern look to the vehicle and can be customized with various colors and designs. It is a popular alternative to traditional glossy vinyl wraps and offers a unique aesthetic appeal.

Installing matte vinyl wrap can be a bit tricky, but with the right tools and techniques, you can achieve a professional-looking finish. Here's a step-by-step guide on how to install matte vinyl wrap:

1. Gather your materials: You will need matte vinyl wrap, a squeegee, a heat gun or hairdryer, a sharp utility knife, rubbing alcohol or a vinyl wrap cleaner, and a microfiber cloth.

2. Prepare the surface: Clean the surface thoroughly with rubbing alcohol or a vinyl wrap cleaner to remove any dirt, grease, or wax. Use a microfiber cloth to ensure a clean and dry surface.

3. Measure and cut the vinyl wrap: Measure the area you want to wrap and cut the vinyl wrap slightly larger than the area to allow for trimming. Use a sharp utility knife and a straight edge to make clean and precise cuts.

4. Peel off the backing: Carefully peel off a small portion of the backing from the vinyl wrap, exposing the adhesive side. Be careful not to touch the adhesive with your fingers to prevent any oils or dirt from transferring onto the wrap.

5. Apply the vinyl wrap: Align the exposed adhesive side of the vinyl wrap with the edge of the surface you are wrapping. Slowly press down the vinyl wrap onto the surface, using a squeegee to smooth out any air bubbles or wrinkles. Work from one edge to the other, applying even pressure.

6. Use heat to stretch and conform the wrap: Use a heat gun or hairdryer to warm up the vinyl wrap as you go. This will make the wrap more pliable and easier to stretch and conform to the contours of the surface. Be careful not to overheat the vinyl, as it can cause damage.

7. Trim the excess vinyl: Once the vinyl wrap is applied, use a sharp utility knife to trim off the excess vinyl. Be careful not to cut into the surface underneath. Use the squeegee to press down and smooth out the edges.

8. Heat and reapply if necessary: If you encounter any air bubbles or wrinkles, use the heat gun or hairdryer to warm up the vinyl wrap and reapply it, smoothing out any imperfections.

9. Final touches: Once the vinyl wrap is applied and trimmed, use the heat gun or hairdryer to heat up the edges and corners, and use the squeegee to press them down firmly for a secure and clean finish.

10. Allow time to cure: Give the vinyl wrap some time to cure and adhere properly. Avoid washing or exposing the wrap to extreme temperatures for at least 24-48 hours.

Remember, practice makes perfect, so don't be discouraged if your first attempt is not perfect. Take your time, be patient, and follow these steps carefully to achieve a professional-looking matte vinyl wrap installation.

Satin Vinyl Wrap,Satin Car Wrap,Matte Wrap,Ultimate Flat,ceramic car vinyl

Guangzhou Fuyulai Technology Co.,Ltd , https://www.fylfilm.com