Model NO.: TIG-315P
Name: AC DC TIG Welding Machine
Mosfet: 40PCS
Diodes: 40PCS
Weight: 35kg
Trademark: As require
Transport Package: Carton
Specification: 560x365x430mm
Origin: Shenzhen China
HS Code: 85153900
Model NO.: TIG-315P
Name: AC DC TIG Welding Machine
Mosfet: 40PCS
Diodes: 40PCS
Weight: 35kg
Trademark: As require
Transport Package: Carton
Specification: 560x365x430mm
Origin: Shenzhen China
HS Code: 85153900
ACDC tig aluminum welding machine product Characteristics:
*Adopting PWM control technology,constant current,accurate current control.
*High frequency arc starting,no matter the current is high or low,the arc starting rate high.
*DC AC tig aluminium welding machine steady welding current,esthetic shaping of welding seam.
*Adjustable pulse current and pulse frequency, apply to many kinds of welding technology.
*ACDC tig welder one machine serves several purposes,saving the welding cost.
*The machine can automatic welding,Optional cycling water tank.
*Can be used to weld aluminium, stainless steel,carbon steel,alloyed steel,copper,titanium etc. 
Model: AC DC TIG-315 
Input power Voltage Frequency(V,Hz): AC380(three phase)±15%,50/60
Rated input power capacity(KVA): 8.9
No-load voltage(V): 45
Output current range.(A):   20-315
Rated output voltage(V): 22.6
Duty cycle (%)(25ºC): 60
No-load loss(W): 40
Arc-starting: HF
Efficiency(%):  85
Power factor (COSφ):  0.93
Insulation class: F
Weight(KG): 34
Overall dimension(mm): 560×364×430
Case protection degree: IP21S
Pre-flow time(s): 0-2
Duty ratio(%):   20-8
Current down-slope time(s): 0-5
Post-flow time(s): 2-10
Remote interface: with
AC welding thickness(mm):      0.8-10
 TIG-315p Inverter Mosfet AC/DC TIG/MMA Welding Machine

  ACDC tig aluminum welding machine product Characteristics:
*Adopting PWM control technology,constant current,accurate current control.
*High frequency arc starting,no matter the current is high or low,the arc starting rate high.
*DC AC tig aluminium welding machine steady welding current,esthetic shaping of welding seam.
*Adjustable pulse current and pulse frequency, apply to many kinds of welding technology.
*ACDC tig welder one machine serves several purposes,saving the welding cost.
*The machine can automatic welding,Optional cycling water tank.
*Can be used to weld aluminium, stainless steel,carbon steel,alloyed steel,copper,titanium etc. 
Model: AC DC TIG-315 
Input power Voltage Frequency(V,Hz): AC380(three phase)±15%,50/60
Rated input power capacity(KVA): 8.9
No-load voltage(V): 45
Output current range.(A):   20-315
Rated output voltage(V): 22.6
Duty cycle (%)(25ºC): 60
No-load loss(W): 40
Arc-starting: HF
Efficiency(%):  85
Power factor (COSφ):  0.93
Insulation class: F
Weight(KG): 34
Overall dimension(mm): 560×364×430
Case protection degree: IP21S
Pre-flow time(s): 0-2
Duty ratio(%):   20-8
Current down-slope time(s): 0-5
Post-flow time(s): 2-10
Remote interface: with
AC welding thickness(mm):      0.8-10
 TIG-315p Inverter Mosfet AC/DC TIG/MMA Welding Machine

 


Concrete Pile Spinning/Centrifugal Machine:

Concrete Pile Spinning/Centrifugal Machine is mainly apply to produce High strength centrifugal technology concrete spun piles of difference diameter and length, Prestressed Reinforced concrete pole(SPC pole) by spinning formed. According to customer's effeciency request, there are Single wheel spinning machine and Double wheel spinning machine at customer's option, it is equipped with a stepless speed-variation motor and a control panel, it works smoothly and its speeder is of wide-range. Its box base is sturdy and durable and easy for installation.


Our Pile Spinning Machine's Advantages:

1. Unique "slot" design, change the screw limit between the bearing support and the base plate with the card slot and bolt limit. Both up and down sides of the spinning machine panel, undersurface and two sides of bearing support go through fine machining. Though the process is complex, it makes it more solid during high-frequency vibration of bearing support and the floor. Repair and replacement also have interchangeability.

Spinning machine for concrete pile

2. Connection shaft is whole shaft, to avoid stress concentration brought by shaft diameter changes, resulting in the phenomenon of "shaft-broken".

Spinning machine for electric pole

3. The limit side of the support wheel is removable. It is convenient for users to replace.

Centrigual machine for Concrete spun pile


4. Frequency-conversion cabinet of spinning machine records process parameter of each pipe and output reports, provides the office computer data communication interface.

Spinng machine automatic controller

 

Spinning Machine Technical Parameter:

Wheel Distance(mm)

2000

Central wheel Distance(mm)

950-1200

Wheel Diameteri(mm)

600

Axle Diameter(mm)

110-125

Automatic controller for centrifugal concrete pile machine

 

 

We can Customize for you. If you have any questions, please contact with us. Welcome you can visit our Factory.For inqury,Please send mail directly to us.



Concrete Pile Spinning Machine

Concrete Spinning Machine,Spun Pile Centrifugal Machine,Concrete Pile Spinning Machine,Pole Spinning Machine

Jiangsu Haiheng Building-Materials Machinery Co.,Ltd , https://www.jshaiheng.com