New Formula Cooling System Flush/Radiator Flush for Car

RADIATOR FLUSH

Features:
This product can effectively remove in 10 minutes the water scale, rust, sludge and all kinds of dirt of common car radiator and engine coolig system, especially for radiator which has not been cleaned for a long time can be cleaned thoroughly. It does not contain acid and alkali, and has charactors such as being efficient, fast, no damaging to parts and rubber,no block to channels etc.
After the application,it can improve the efficiency of radiator and engine power, reduce consumption and save energy , prolong the engine life.

Directions:

1. Shut down the engine after running idle speed 5 minutes, put off the cooling fluid and add this product to the water tank,then fill up the water tank with fresh water.
2. Start the engine to normal operating temperature, then idle running 10-20 minutes. For water tanks with heavy scale or not be cleaned for a long time,need to double the cleaning time.
3. Shut down the engine, put off the water in the tank, fill up water again, run 5 minutes and then drain it.
4. One can of the product for Car with water tank volume below 10 litres, two cans for one with water tank volume more than 10 liters.

Precaution:
For water tank long-term not be cleaned, extend appropriately the cleaning time.After cleaning ,it is better to add a bottle of water tank rust protective agent.
Pease use it up once opened it.
Keep out of reach of children.
In case of splash on clothes should immediately wash it with soap and clean water so as to avoid pollution.
If swallow by mistake, should immediately induce vomiting and go to hospital.
If splashed into the eyes or skin, rinse off with clear water immediately and seek timely medical treatment.

About Us
Tonyin Group was founded in 2007. The factory locate in Guangzhou.
1. Technology and equipment
Brings in Britain KP system, Italian COSTER system, Switzerland PAMASOL system, and series of professional automatic aerosol created system. Tonyin group adhere to the philosophy of "Green environmental protection, High aspirations of success; Scientific and technical innovation, Unity is strength".
2. Certificate
It havs passed the identification of "ISO9001:2008 quality system", "ISO14001 environment system certificate", "Safe Production license of the dangerous chemicals" and "OHSAS18001 occupational,health and safety management system certificate". Auto Parts products have obtained CCC, DOT, ECE and GCC certifications etc. , and Car Care & Maintenance and Home Care products have passed SGS laboratory testing and achieved international qualieautifying and maintenance, car air treatment, fuel system conservation anty standards.
3. Products line
We have more than 120 kinds, 10 series of car detailing & cleaner products, for Glass, Tyres & Wheels, Paint, Cooling system, Engine, Air conditioner, Chassis, and Oil. for example: Headlight Restore, Windshield Washer Solvent, Wax, Spray Wax, Nano Chrome Paint, Nano Ceramic Coating, Tyre Sealent, Tyre & Wheel Cleaner, Leather Coating, Tyre Shine, Hand Soap, R134A, Wash & Wax (Shampoo), Carbon Cleaner, Lubricant, Gasoline Treatment, Injector Cleaner, Octance Booster, Brake & Parts Cleaner, Brake Fluid DOT-4, ATF Oil.....etc.
Due to the professional R & D team , the compnay continually keep launching new products and take the initiative in the markets.

Factory tour


Exhibition

 
 

RADIATOR FLUSH

Features:
This product can effectively remove in 10 minutes the water scale, rust, sludge and all kinds of dirt of common car radiator and engine coolig system, especially for radiator which has not been cleaned for a long time can be cleaned thoroughly. It does not contain acid and alkali, and has charactors such as being efficient, fast, no damaging to parts and rubber,no block to channels etc.
After the application,it can improve the efficiency of radiator and engine power, reduce consumption and save energy , prolong the engine life.

Directions:

1. Shut down the engine after running idle speed 5 minutes, put off the cooling fluid and add this product to the water tank,then fill up the water tank with fresh water.
2. Start the engine to normal operating temperature, then idle running 10-20 minutes. For water tanks with heavy scale or not be cleaned for a long time,need to double the cleaning time.
3. Shut down the engine, put off the water in the tank, fill up water again, run 5 minutes and then drain it.
4. One can of the product for Car with water tank volume below 10 litres, two cans for one with water tank volume more than 10 liters.

Precaution:
For water tank long-term not be cleaned, extend appropriately the cleaning time.After cleaning ,it is better to add a bottle of water tank rust protective agent.
Pease use it up once opened it.
Keep out of reach of children.
In case of splash on clothes should immediately wash it with soap and clean water so as to avoid pollution.
If swallow by mistake, should immediately induce vomiting and go to hospital.
If splashed into the eyes or skin, rinse off with clear water immediately and seek timely medical treatment.

About Us
Tonyin Group was founded in 2007. The factory locate in Guangzhou.
1. Technology and equipment
Brings in Britain KP system, Italian COSTER system, Switzerland PAMASOL system, and series of professional automatic aerosol created system. Tonyin group adhere to the philosophy of "Green environmental protection, High aspirations of success; Scientific and technical innovation, Unity is strength".
2. Certificate
It havs passed the identification of "ISO9001:2008 quality system", "ISO14001 environment system certificate", "Safe Production license of the dangerous chemicals" and "OHSAS18001 occupational,health and safety management system certificate". Auto Parts products have obtained CCC, DOT, ECE and GCC certifications etc. , and Car Care & Maintenance and Home Care products have passed SGS laboratory testing and achieved international qualieautifying and maintenance, car air treatment, fuel system conservation anty standards.
3. Products line
We have more than 120 kinds, 10 series of car detailing & cleaner products, for Glass, Tyres & Wheels, Paint, Cooling system, Engine, Air conditioner, Chassis, and Oil. for example: Headlight Restore, Windshield Washer Solvent, Wax, Spray Wax, Nano Chrome Paint, Nano Ceramic Coating, Tyre Sealent, Tyre & Wheel Cleaner, Leather Coating, Tyre Shine, Hand Soap, R134A, Wash & Wax (Shampoo), Carbon Cleaner, Lubricant, Gasoline Treatment, Injector Cleaner, Octance Booster, Brake & Parts Cleaner, Brake Fluid DOT-4, ATF Oil.....etc.
Due to the professional R & D team , the compnay continually keep launching new products and take the initiative in the markets.

Factory tour


Exhibition

 
 

What is the Multi Head CNC Router?

Multi head CNC engraving machine is a Cnc Router Machine designed for users with small product size and large processing volume. This kind of CNC wood router spindle number can be customized according to the user's specific processing needs. If different heads work at the same time, can finish several same pattern greatly improves the processing speed and working efficiency. Users can also use a single head to work if no need do mass work.

Therefore, with the advantages of fast product processing speed, good consistency, low cost, high production efficiency, and diversified processing methods, such multi-head engraving machines are welcomed by domestic and foreign users. If you have similar batch production needs, this multi-head engraving machine is definitely your ideal choice.

Application of Multi Head Cnc Router
This type of multi-head engraving machine is mainly applicable to the processing of three-dimensional wave board, cabinet doors, solid wood doors, craft wooden doors, paint-free doors, screens, craft window etc., and it is widely used in antique furniture, European-style furniture and other furniture industries. And this type of multi head Cnc Router is also suitable for processing cabinet doors, art embossed screens, craft windows, embossed craft gifts, solid wood art murals, woodwork calligraphy carving, art photo frames, electrical counter tops, sports equipment, violin arcs, non-ferrous metal carving and cutting.

Multi Head CNC Router

Multi Head Cnc Router,Multi Spindle Cnc Router,Multi Head 4 Axis Cnc Router Machine,Multi Heads Cnc Router Engraver Machine

Jinan Transon Cnc Equipment Co., Ltd. , https://www.csjiguang.com