Model NO.: construction material machinery
Name: Construction Material Machinery
Cover Width: 850mm
Coil Width: 1000mm
Coil Sheet Thickness: 0.2-0.8mm
Material of Frame: 300h Steel
Solid Shaft: (High Grade) 45# Steel
Thickness of Middle Plate: 16mm
Forming Station: 13
Drive Type of Roll Forming Machine: by Chain(0.8 Inch)
Machine Name: Corrugated Steel Sheet Metal Roof Roll Forming Mac
Trademark: DIXIN
Transport Package: Waterproof Package and Ship in a Container
Specification: CE ISO BV
Origin: Botou Hebei China
HS Code: 845522
construction material machineryMetal Roof Construction Material Machinery

 1  
Coil width 1000mm
2 Cover width 850mm
3 Coil sheet thickness 0.2-0.8mm
4 Material of frame 300H steel
5 Diameter of shaft (solid shaft) (high grade) 45# Steel
6 Diameter of shaft (solid shaft) 75mm
7 Treatment of roller quenched and  tempered treatment, hard chromized  coated 0.05-0.07mm
8 Thickness of middle plate 14mm
9 Forming station 13 stations
10  Drive type of roll forming machine   drive by chain(0.8 inch)
11 Power of main motor 4KW
12 Motor power of hydraulic station 4KW
13 Oil pump of hydraulic station No.46 gear oil pump (high grade)
14 Forming speed about 8-12 m/min
15 Voltage 380V/50Hz/3phase
 16   Hydraulic cutting   cutting controlled by PLC
17 Accuracy of cutting +/- 1mm
18 Razor blades material Cr12, quenching 58-62 °
19 Electrically controlled system  entire machine controlled by PLC
20 PLC DELTA(TAIWAN)
 21  Weight of main forming machine About 3T
Metal Roof Construction Material Machinery

Service
Terms of Payment: 30% of the total contract value paid by T/T as down payment, the rest 70% of the total contract value to be paid by T/T after inspection by buyer in seller's factory while before delivery.                     
Delivery: 50 days after receipt of advance payment
 Metal Roof Construction Material Machinery

Service: we send technician to your country to fix the machine.The buyer should bear all the cost including: visa, Roundtrip tickets and suitable accommodation, also buyer should pay salary 100USD/day.
 
Warranty: 12 months limited warranty
Metal Roof Construction Material Machinery 

During warranty:  parts are free but buyer pay for the shipping fee
Metal Roof Construction Material Machinery

Contact: Bella Hao  mobile: 008618231723279 

Metal Roof Construction Material Machinery
 

Photovoltaic Pile Driver

 

There are many types of photovoltaic power piling machines, and the working principle of each type is different. Photovoltaic power piling machine can basically be divided into hydraulic piling machine, drop hammer piling machine, steam hammer piling machine, diesel hammer piling machine, in which steam hammer photovoltaic piling machine often needs supporting the use of screw air compressor.

 

The machine is suitable for piling works such as building foundation construction, high-speed road foundation reinforcement, high-speed railway power facilities, wind power plants, solar photovoltaic power plants, soft soil treatment and reinforcement.

 

Hydraulic PV power Pile Driver is a multi-purpose highway guardrail steel pipe pile Construction Machinery. With hydraulic pressure as the driving force, the hydraulic pressure can be adjusted according to different soil conditions in the stratum to achieve appropriate impact force for driving. It is a new type of pile driver. According to different configurations, steel pipe piles can be driven in, pulled out, or drilled on the subgrade and stabilization layer before being piled.

 

Drop Hammer Photovoltaic Power Pile Driver is a kind of pile tube sinking equipment. It has the advantages of simple design, easy installation and transportation, high impact force, stable performance and so on. It is a steel weight, which is lifted by the hoisting machine, and it is lifted off the trailing guide frame. Freefall and piling. All use electric power, without having to buy expensive diesel power.

 

The main body of the diesel hammer pile driver is also composed of a cylinder and a plunger. The cylinder type diesel hammer uses the cylinder as a hammer seat and directly guides the inner wall of the extended cylinder barrel, eliminating two guide rods. The plunger is a hammer head, which can be The cylinder moves up and down. Its working principle is similar to that of a single-cylinder two-stroke diesel engine. The diesel hammer has a fuel injection pump, a fuel tank, a cooling water tank, and a pile cap attached to the hammer seat. The gap between the plunger and the cylinder is sealed with a resilient plunger ring.

 

Specification

Drill depth :0-9m

Drill diameter :50-900mm

Geological requirements:soil or soft rock

Photovoltaic pile driver

Photovoltaic Pile Driver

Photovoltaic Pile Driver,Hydraulic Photovoltaic Pile Driver,Photovoltaic Solar Pile Driver,Photovoltaic Pile Driver With Crawler

Shandong Hengwang Group Co., Ltd , https://www.hwmac.com