Investigation and Analysis of Development Prospect of China's Beverage Machinery

The domestic beverage industry market is a new industry that slowly developed after the reform and opening up. The renewal of beverage machinery and equipment has also driven the development of the beverage and food industry. From the scratch of our country's beverage industry, from small to large, from the basic The scale has slowly become one of the key food industries that the social market must have, and presents four major development highlights. The development of the beverage industry on the one hand has also contributed to the development of the national economy and made due contributions to the improvement of the living standards of the socialist people. It is believed that the market for beverage machinery will also be necessary in the market environment where beverages are diversified. There is a new development.

In recent years, with the improvement of consumer awareness and purchasing power, the beverage industry in China has made considerable progress. The market scale has expanded and the products have gradually diversified. It has evolved from a single soda to include carbonated beverages, juice drinks, and functional beverages. The beverage system, including drinking water, provides consumers with more choices.

The "2011-2015 China Soft Drink Industry Investment Analysis and Prospect Forecast Report" released by the China Investment Advisor shows that the average annual growth rate of China's soft drink production reached 20.6%, which was 42.197 million tons, 51.10 million tons, 64.151 million, respectively. Tons, 80.862 million tons and 99.837 million tons. At the same time, the annual sales revenue of the soft drinks industry has also maintained rapid growth for five years. Among them, carbonated beverages, bottled drinking water, fruit and vegetable juice and fruit and vegetable juice beverages, milk beverages and plant protein beverages, solid beverages, tea beverages and other soft drinks The compound annual growth rate of sales revenue was 13.76%, 21.24%, 25.90%, 35.25%, 18.10%, and 30.28%, respectively.

The continuous subdivision of the beverage market has also put forward more and higher requirements for beverage machinery. Beverage machinery is a mechanical device used to manufacture various beverages. It is generally composed of many machines to process various beverages, such as Water Treatment equipment, bottle rinsing machines, filling machines, sealing machines, sterilization equipments and so on. Beverage machinery is accompanied by the development of the beverage industry and has evolved along with the development of the soft drink industry.

The domestic beverage industry market is a new industry that slowly developed after the reform and opening up. The renewal of beverage machinery and equipment has also driven the development of the beverage and food industry. From the scratch of our country's beverage industry, from small to large, from the basic The scale has slowly become one of the key food industries that the social market must have, and presents four major development highlights. The development of the beverage industry on the one hand has also contributed to the development of the national economy and made due contributions to the improvement of the living standards of the socialist people. It is believed that the market for beverage machinery will also be necessary in the market environment where beverages are diversified. There is a new development.

One of the highlights of the tea beverage has led to the development of hot-fill PET bottles PET PET bottles have been developed in China for only 10 years, while the history of hot-fill PET bottles is even shorter in China, only about 4 years, but The momentum of development has surpassed that of most other packaging containers. This rapid momentum is mainly due to the rapid development of tea beverages. As we all know, tea beverages, fruit juice beverages, etc. are the hot spots for beverage development. In China, the output of tea beverages exceeded 1,500,000 tons in 2000. Most of the packaging containers use PET hot-filling bottles, and the proportion is increasing.

Lu Huancheng, deputy general manager of Zhuhai Zhongfu Industry Group Co., Ltd., said that the principle of production of PET hot-filled bottles is: PET bottles are generally injection-molded into preforms → after heating, the preforms are stretched in the machine direction → transversely stretched → blow-molded. The final molding in this production process adopts mechanical cold set. Therefore, once the PET bottle is used, the molecular chain will relax when the temperature reaches the PET glass transition temperature of 78° C. or so, and the bottle will have a severe shrinkage phenomenon. Only suitable for cold filling drinks.

Liu engineers recalled that China’s current number of tuning machines was zero a decade ago. Before the 1990 Asian Games, Coca-Cola took the lead in the Beijing and Shanghai, and the L900 model was produced by the LANCER company. The Chinese people have never seen it before. The square-headed, square-headed brains lined up long lines before buying beverages, and now they have become the darling of the carbonated beverage market. Coca-Cola has benefited greatly from this.

Since then, the number of existing adjustment machines has rapidly increased. The number of single Coca-Cola companies had already invested more than 30,000 units in the Chinese market in 2001. There are other Pepsi-Cola and Jianlibao, Rising Sun and so on that can compete with them. However, so far, China's current ownership of beverages and total sales are still quite low. As the current beverage dispenser is a commercial market equipment, the maintenance and maintenance of the equipment itself and the reasonable operation of the user directly affect the sales volume and quality of the beverage, and if a few consumers have a bad impression on it, such adverse effects will The rapid spread eventually led to the majority of consumers no longer have the desire to buy and made the sales decline. Therefore, current beverages need to be supported by a comprehensive set of service management systems, such as customer training, equipment management, timely delivery, prompt repairs, regular maintenance, and occasional quality inspections. Coca-Cola Company's bottling plants specially set up the current tuning department to operate in the sales system. Pepsi Co., Ltd. directly set up the MEM department's market equipment management department to ensure that the current tuning users receive the most direct and effective services.

Highlights of the 4th PET bottled beverages aseptic filling prospects promising As a food packaging, the main requirements are that it is easy to store and transport, reduce the original performance loss, do not bring additional injury, increase sensory enjoyment, and the price is reasonable. At present, the methods of liquid food packaging mainly include: general packaging, secondary sterilization packaging including cans, bottles and bags, hot filling, vacuum packaging, inflatable packaging, radiation sterilization packaging and aseptic packaging. Aseptic packaging of liquid foods is a new technology developed in recent years. Due to its obvious advantages, the development speed is very fast.

Aseptic food packaging refers to the sterilization of liquid food packaging in a sterile environment, closed in a sterilized container, in order to obtain a long shelf life without preservatives, without refrigeration. It can also be simply said that aseptic packaging is sterilized before packaging, non-sterile packaging is first sterilized after packaging or only packaging is not sterilized.

Huang Zhendong, chairman of Jiangsu Meixing Shunfeng Machinery Co., Ltd. pointed out that the main advantage of aseptic packaging is to maintain the original nutrients and flavors in foodstuffs under aseptic conditions and reduce losses. Aseptic packaging can be more convenient. The ultra-high temperature instantaneous sterilization method is used to disinfect the food before packaging, while other packaging methods are quite difficult; the packaging cost of aseptic packaging is relatively low, and as the production volume increases, the investment in equipment allocated to each product will be further reduced; Convenient transportation, beautiful appearance, easy to be welcomed by businesses and consumers. A complete aseptic packaging production line includes material food sterilization system, aseptic packaging machine, packaging material and packaging supply and sterilization system, automatic cleaning system, equipment pre-sterilization system, aseptic environment maintenance system and automatic control system; Sterilization has so far been mainly used heat sterilization, according to the viscosity of the material, thermal performance and production scale can be used plate, tube coil or tube, scraper or hybrid heat exchanger, in order to further shorten the temperature of the material And cooling time, the manufacturers developed and produced direct injection methods such as steam injection, steam mixing, and hot water mixing, and recently developed Ohm heaters; sterilization of packaging materials or packaging containers currently uses chemical drugs for sterilization. However, after sterilization, they should be thoroughly cleaned and dried to minimize chemical residues. Aseptic packaging systems are mostly pre-sterilized with superheated steam or dry air, and can also be sterilized with drugs.

As introduced by Chairman Huang, aseptic packaging technology was born in the late 1940s. Since the 60s, rapid development of plastics for packaging has provided a broad development space for the development of aseptic packaging. By the 1990s, there were more than 30 companies in foreign countries producing Aseptic packaging equipment, and many other production sterilization system, packaging materials, components supporting manufacturers, domestic development and production of aseptic packaging equipment and supporting sterilization system, packaging materials are gradually increasing.