Coolsour Eccentric Flaring Tool CT-808A/CT-808m

COOLSOUR Tube Cutter 

Feature:
Cutting copper,steel,stainless and aluminum tubing
Making clean,right-angle cuts with no burrs or chip to clog tubing;
Polished steel rollers with flare cut-off groove fasten the tube for cutting;
With a spare cutter wheel.

Technical Parameter:













  COOLSOUR Tube Cutter 

Feature:
Cutting copper,steel,stainless and aluminum tubing
Making clean,right-angle cuts with no burrs or chip to clog tubing;
Polished steel rollers with flare cut-off groove fasten the tube for cutting;
With a spare cutter wheel.

Technical Parameter:













 

The Knock Sensor is located on the engine block, cylinder head or intake manifold. This is because its function is to sense vibrations caused by engine knock or detonation. The PCM uses this signal to alter the ignition timing and prevent detonation. It will compare this information with its preset tables to identify a valid knock or ping. If a ping is sensed, it will retard the ignition timing to protect the engine from this damaging pre-ignition.

Knock Sensor

Knock Sensor,Auto Knock Sensor,High Performance Knock Sensor,Gm Car Knock Sensor

NINGBO DGOFEN AUTO TRADE CO., LTD , http://www.dgofen.com