Technical Data
1. Material thickness: 0.6-1.5mm galvanized coil
2. Decoiler weight: 3 ton manual
3. Rolling speed: 10-12m/min
4. Roller stations: About 13 stations
5. Roller material: GCr15 steel with quenching
6. Shaft material: No. 45 steel diameter 75mm shaft
7. Main motor power: 5.5Kw
8. Hydraulic cutting power: 5.5Kw
9. Cutting material: Cr12 with quench treatment, hardness 58-62
10. Electric source: 440V, 60Hz, 3 Phase
11. Machine weight: 3Tons
12. Way of drive: One inch single chain
Technical process
Decoiler--- feeding with guide--- rolforming---cutting---products collecting
Assembly and commissioning
Our engineer will visit buyer's workshop for intall, commission and training. The customer should ensure the pre-installation being carried out appropriately. The buyer pays the round-trip air tickets, local cost in buyer's workshop; Buyer has to pay USD 100 per day, per engineer.
Warranty
12 months warranty, starting from the date of the successful installation and commissioning of the equipment.
| Machine Composition | |
|  3 ton passive de-coiler | 1 set |
| main roll forming machine | 1 set |
| PLC control box | 1 unit |
|  hydraulic station | 1 unit |
| outer table | 2 units |
In order to satify our customer need for commercial vending machine and industrial equipment, we develop large power Thick Film Heating Element. It can realize 6000w on single Thick Film Heating Tube. And it is widely used in industrial field for water boiler and thermal exchange equipment.
Under the same conditions, Jieda products have many application advantages, such as large heating area, high he at conduction efficiency (≥98%), rapid thermal response (≥80~150 ℃/S), long working life (≥10000 hours) etc. Beside this Jieda has the advantages of continous R&D investment, independent printing method and mass production gurrantee.
20Mm Stainless Steel Welding Heater,Stainless Steel Welding Heater,Welding Heater,Welding Rod Heater
XINXIANG JIEDA PRECISION ELECTRONICS CO.,LTD , https://www.tubularheater.de