1.Products are manufactured in accordance with all relevant gasket standards.
2.All types of Spiral wound gaskets can be manufactured, CG, CGI, R, RIR, etc.
3.Our production capacity is 150,000 pcs per month.
4.Material combinations for all operating conditions.Â
Â
Sunwell seals spiral wound gaskets have 4 types:
1.SW600-R Basic Type
Basic construction type, inner and outer diameters are reinforced with several piles of metal without filler to give greater stability and better compression characteristics. - Suitable for tongue and groove, male and female or grooved to flat face flange assemblies.
2.SW600-IR Inner Ring Type
Solid inner metal ring acts as a compression stopper. To prevent accumulation of solids, reduce turbulent flow of process fluids and minimize erosion, damages of gasket between flange bore and the inside diameter, the annular space is filled up by solid inner metal ring. - Suitable for male and female pipe flanges.
3.SW600-CGÂ Outer Ring TypeÂ
Solid outer ring accurately locates the gasket on the flange face to give the additional radial strength to prevent the gasket blowout and acts as a compression limiter. In case of installing the outer ring, it is very easy to install the gasket to flange face because the end of outer ring will touch at bolts - Suitable for use with flat face and raised face flanges. For class 900 and above an internal ring is recommended.
Â
4.SW600-CGI Inner & Outer Rings Type
A inner ring and outer ring type gasket will give an additional compression limiting stopper for gasket inner and outer side. It will prevent the corrosions on flange face at annular space. - Suitable for use with flat face and raised face flanges and specified for high pressure / temperature service - Class 900 and above or where corrosive or toxic media are present.
Spiral wound gaskets
More information of spiral wound gaskets,please contact with sunwell seals,thanks.
Car Covers can protect your car paint. As well, it can protects your car from dust,birds droppings,UV,rain,snow,scrach,etc. In the summer,Car Covers can even make your car cooler. BEST WAY Car Protective Covers are available both for indoor use and outdoor use. We normally use 170T polyester and 70G non-woven as Indoor Car Covers; And use 3 or 4 layers non-woven, Oxford, 250G PVC & 150G PE material as outdoor Car Covers. 250G PVC & 150G PE are waterproof car protective covers. 3 or 4 layers non-woven and Oxford material is water resistant material, but not waterproof. But 170T or 190T polyester and 70G or 80G Non-Woven Car Covers are breathable Car Covers. They're not waterproof at all. So you should choice which kind of material to buy depends on your requirements. Besides the material,you should also know your vehicle type or vehicle sizes. Since we have sedan Car Covers, SUV Car Covers, pick-up Car Covers, Van Car Covers, ATV covers,motorcycle covers....
We have one joint-venture factory who is producing Car Seat Covers,steering wheel covers & Car Covers. So we can provide very competitive prices on these items.Meantime,we can provide you one-stop solution service for other car accessories, such as car mats, Car Sunshades , Car Roof Racks ,tint films, Wheel Nuts & bolts,etc.
Car Covers
Car Protective Covers,Atv Car Covers,Motorcycle Car Covers,Breathable Car Cover,Waterproof Car Covers,Weather Protect Car Covers
Ningbo Best Way Auto Accessory Co., Ltd. , https://www.autoaccessorycn.com