Model NO.: 2X
Impeller: Single-Stage Pump
Trademark: SUOTO
Transport Package: Wooden Case
Origin: Shanghai, China
HS Code: 8414100090
Model NO.: 2X
Impeller: Single-Stage Pump
Trademark: SUOTO
Transport Package: Wooden Case
Origin: Shanghai, China
HS Code: 8414100090
Application
2X Rotary Vane Vacuum Pump is one of the basic equipment for obtaining vacuum for airtight containers by exhausting gas. It can be used alone, or used as the fore pump in front of the booster pump, diffusion pump, molecular pump, etc. This pump is applicable to the vacuum metallurgy, vacuum welding, vacuum impregnation, coating, vacuum drying, as well as the vacuum treatments in chemical and pharmaceutical industry, electric vacuum devices and other industries.

Notices
1. The pump can work within the ambient temperature range of 5~40 and under the inlet pressure less than 1330PA. It is also allowable for long-term continuous work.
2. The pump is neither applicable to pump the gases which have excessive oxygen content, poisonous and explosive feature, corrosive effects to etals and chemical reactions with oil of pumps, and dust particles, nor act as a transfer pump to transfer gas form one container to another.
3. The continuous working hours of the pump under the inlet air pressure of 6000PA shall not exceed 3min to avoid damages caused by oil injection or bad lubrication.

Specifications
Model 2X-4A 2X-8A 2X-8 2X-15 2X-30A 2X-70A
(L/S)
Pumping Speed
4 8 8 15 30 70
(≤ Pa)
Ultimate Pressure
≤ 6× 10 -2
(kw)
Motor Power
0.55 1.1 1.1 2.2 3 5.5
(Degrees C)
Temperature Rise
≤ 4 Degrees C
dB(A)
LW Noise
≤ 75 ≤ 78 ≤ 78 ≤ 80 ≤ 82 ≤ 86
(mm)
Inlet Diameter
Φ 25 Φ 25 Φ 40 Φ 40 Φ 65 Φ 80
(rpm)
Rotational Speed
450 550 320 320 450 420
(L)
Injection Amount of Oil
0.7 0.9 2 2.8 2 4.2
(cm)
Size
55× 34× 41 55× 43× 44 79× 43× 54 79× 53× 54 78× 50× 56 91× 65× 70
(Kg)
Weight
54 70 135 196 240 428
Application
2X Rotary Vane Vacuum Pump is one of the basic equipment for obtaining vacuum for airtight containers by exhausting gas. It can be used alone, or used as the fore pump in front of the booster pump, diffusion pump, molecular pump, etc. This pump is applicable to the vacuum metallurgy, vacuum welding, vacuum impregnation, coating, vacuum drying, as well as the vacuum treatments in chemical and pharmaceutical industry, electric vacuum devices and other industries.

Notices
1. The pump can work within the ambient temperature range of 5~40 and under the inlet pressure less than 1330PA. It is also allowable for long-term continuous work.
2. The pump is neither applicable to pump the gases which have excessive oxygen content, poisonous and explosive feature, corrosive effects to etals and chemical reactions with oil of pumps, and dust particles, nor act as a transfer pump to transfer gas form one container to another.
3. The continuous working hours of the pump under the inlet air pressure of 6000PA shall not exceed 3min to avoid damages caused by oil injection or bad lubrication.

Specifications
Model 2X-4A 2X-8A 2X-8 2X-15 2X-30A 2X-70A
(L/S)
Pumping Speed
4 8 8 15 30 70
(≤ Pa)
Ultimate Pressure
≤ 6× 10 -2
(kw)
Motor Power
0.55 1.1 1.1 2.2 3 5.5
(Degrees C)
Temperature Rise
≤ 4 Degrees C
dB(A)
LW Noise
≤ 75 ≤ 78 ≤ 78 ≤ 80 ≤ 82 ≤ 86
(mm)
Inlet Diameter
Φ 25 Φ 25 Φ 40 Φ 40 Φ 65 Φ 80
(rpm)
Rotational Speed
450 550 320 320 450 420
(L)
Injection Amount of Oil
0.7 0.9 2 2.8 2 4.2
(cm)
Size
55× 34× 41 55× 43× 44 79× 43× 54 79× 53× 54 78× 50× 56 91× 65× 70
(Kg)
Weight
54 70 135 196 240 428

Unloader valve

Unloader valve,Filter cage,Airslide hose

Century New Power International Trade Co., Ltd. , http://www.tjdustcollector.com